Differential pressure sensor Beck IP 65
The differential pressure transmitters of the 985M series are used for measuring differential pressure, positive pressure and vacuum. They offer 2 pressure ranges which can alternatively be selected by a jumper. The IP65 body protects the pressure transducer even in difficult environments. Monitoring gaseous, non-aggressive media. Possible areas of application are:
The differential pressure transmitters of the 985M series are used for measuring differential pressure, positive pressure and vacuum. They offer 2 pressure ranges which can alternatively be selected by a jumper. The IP65 body protects the pressure transducer even in difficult environments. Monitoring gaseous, non-aggressive media. Possible areas of application are:
air-conditioning and clean rooms
building automation
environmental protection
fan and blower control
valve and flap control
filter and blower monitoring
fluid and level monitorig
control of air flows For optimum adaptation to the pressure application, the transmitter can be switched between two pressure ranges. The factory setting is the sensitive range
1, which is selected by fitting a jumper. Removing the jumper activates the non-sensitive range 2. The output signal of the 3-wire version is configurable. The factory setting is for a 0 ...10 Volt output signal, but this can be changed to 4 ... 20 mA by removing the jumper. The 2-wire version is only available with a 4 ... 20 mA output signal.
No comments:
Post a Comment